Ana içeriğe geç

12. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Spray contact cleaner in the faulty potentiometer
-[* icon_reminder] A little contact cleaner goes a long way. You should not need more then 1-2 small bursts of contact cleaner to get the switch to function. If more then 2 sprays are required, consider purchasing a replacement board.
-[* black] With the control board mostly removed, spray contact cleaner into the potentiometer. While you can use any contact cleaner, DeoxIT is your best option as most formulations are anti corrosive. Once you have sprayed contact cleaner into the potentiometer, turn it several times.
+[* icon_reminder] A little contact cleaner goes a long way and more then 1-2 sprays should be needed. If you need to use a fair amount of contact cleaner to get it working, the potentiometer may be damaged and a new board may be required.
+[* black] With the control board loose from the front panel, spray contact cleaner into the potentiometer. Once this is done, clean up the excess and turn the switch several times.