Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Wipe away any excess contact cleaner
[* icon_caution] The only reliable long term fix for this problem is a replacement board. The reason for this is there is no way to tell if your board will keep working for years or fail again.
[* icon_caution] While you can reassemble the unit right away, it should not be plugged in for ~30 minutes-1 hour. This will allow any leftover contact cleaner to dry.
-[* icon_reminder] If you cut the ziptie, put a new one on when the faceplate is reinstalled on the receiver. If you do not have one available, the wires can be tucked behind the fan in a way they won't easily fall out and jam the fan. ***Note:*** Failure to do this may result in protection mode problems. If this happens the wires should be ziptied to avoid problems.
+[* icon_reminder] If you do not have zipties available, tuck the wires in the fan so that they cannot easily move. While this is not a good idea for long term use, it is an option to get you by until you can purchase zipties.
[* black] Wipe off any excess contact cleaner that got on the PCB. Once the volume control board is dry, reinstall the volume control board into the front panel.