Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Wipe away any excess contact cleaner
-[* icon_reminder] This fix may not be permanent. In some cases, the issue may come back if the potentiometer is damaged. In the event it fails again, the board will have to be replaced. It is also not a good idea to reassemble or power on the receiver for ~30 minutes-1 hour so any leftover contact cleaner on the PCB can dry.
-[* icon_reminder] If you do not have zipties available, tuck the wires in the fan so that they cannot easily move. While this is not a good idea for long term use, this may allow you to "get by" until you can purchase zipties.
-[* black] Wipe off any excess contact cleaner that got on the PCB. Once the volume control board is dry, reinstall the volume control board into the front panel.
+[* icon_reminder] This fix may not be permanent and the problem may come back. Replace the board or potentiometer if this happens. ***Let the switch dry for ~30 minutes-1 hour before reassembly.***
+[* icon_reminder] If you do not have zipties available, tuck the wires in the fan so that they cannot easily move. This isn't ideal long term, but can get you buy without zipties.
+[* black] Wipe off any excess contact cleaner that got on the PCB. Reinstall the board once the contact cleaner is dry.