Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Once you do this, wipe the switch off. After doing this, put it back in the unit and reverse disassembly. ***Let it dry for 10-15 minutes or LONGER before powering the amp on!***
[* icon_note] The only real way to fix this long term is to solder a new switch in. I would only do this if you want to test it cheaply or if this is the only option to solve it. ***Do not sell this solution to clients.***
-[* icon_reminder] If you choose to clip the zipties on the fan, make sure they don't get in the fan. If they do, the unit will go into a protection mode. If this happens, remove the cables from the fan and either replace the ziptie or tuck them in the fan further.
+[* icon_reminder] If you choose to clip the zipties on the fan, make sure they don't get in the fan. If they do, the unit will go into protection mode. If this happens, remove the cables from the fan and either replace the ziptie or tuck them in the fan further.