Ana içeriğe geç

9. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Unclip the faceplate
-[* icon_reminder] Once the unit is reassembled, these zipties must be replaced. Failure to do this may result in protection mode errors.
-[* black] Cut the zipties that hold the front panel wires on the fan. This is required as it is the best way to free up room on the front panel to access the control boards.
-[* black] With the faceplate loose and all of the cables disconnected, unclip the faceplate one side at a time. The faceplate should lay on your workspace with enough room to work on accessing the control boards.
+[* icon_caution] Once the unit is reassembled, these zipties must be replaced. Failure to do this may result in protection mode errors.
+[* black] Cut the zipties that hold the front panel wires on the fan. This will provide the best access to the components.
+[* black] With the faceplate loose and all of the cables disconnected, unclip the faceplate one side at a time. Lay the faceplate flat on your workspace. ***Leave enough room to access the boards on the front panel.***