Ana içeriğe geç

9. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Unclip the faceplate
-[* icon_caution] Once the unit is reassembled, these zipties must be replaced. Failure to do this may result in protection mode errors.
+[* icon_caution] ***''Once the unit is reassembled, these zipties must be replaced. Failure to do this will result in protection mode errors.''***
[* black] Cut the zipties that hold the front panel wires on the fan. This will provide the best access to the components.
-[* black] With the faceplate loose and all of the cables disconnected, unclip the faceplate one side at a time. Lay the faceplate flat on your workspace. ***Leave enough room to access the boards on the front panel.***
+[* black] With the faceplate loose and all of the cables disconnected, unclip the faceplate one side at a time. Lay the faceplate flat on your workspace. ***''Leave enough room to access the boards on the front panel.''***