Xbox 360 Red Ring of Death Fix Kit 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart — 23 Nis 2013

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

-	[* ~~black~~] *The X-clamps are not reused when installing the red ring of death fix kit.*
-	[* black] Now that the heat sinks are off both processors, clean all the old thermal paste residue off the faces of both processors and the inner faces of the heat sinks.
+	[* icon_note] *The X-clamps are not reused when installing the red ring of death fix kit.*
+	[* black] Now that the heat sinks are off both processors, use a plastic spudger to clean all the old thermal paste residue off the faces of both processors and the inner faces of the heat sinks.
	[* icon_caution] Work slowly as you remove the old residue, as many sensitive components are soldered near the face of the processors and if broken, you need a whole new motherboard
-	[* icon_note] It is ~~helpful~~ to use a solvent such as ~~"Goof Off"~~ to dissolve the old thermal paste. ~~After using~~ a ~~product like "Goof~~ ~~Off", be sure to remove its residue using~~ rubbing alcohol ~~or Windex~~.
+	[* icon_note] It is best to use a solvent such as [product\|IF179-023\|ArctiClean] to dissolve the old thermal paste and remove all residue before applying new paste. Alternatively, you can use a mild solvent such as a high purity rubbing alcohol.
	[* icon_note] You can also use many classic dry-deoxidating sprays: spray it on the paste then rub it; you will remove the paste almost effortlessly and with no residues.
	[* icon_note] Now is also a good time to clean any dust out from between the fins of both heat sinks.