4. Adımdaki Değişiklikler
Düzenleyen: unsubstantiated —
Düzenleme onaylandı tarafından Evan Noronha
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Use the 1/4" drive end of the included screwdriver with no bit inserted to remove the four X-clamp posts from both the CPU and GPU heat sinks. |
|---|---|
| - | [* black] Use the 1/4" drive end of the included 6-in-1 screwdriver with no bit inserted to remove the four X-clamp posts from both the CPU and GPU heat sinks. |
| + | [* black] Use the 1/4" hex drive end of the included screwdriver with no bit inserted to remove the four X-clamp posts from both the CPU and GPU heat sinks. |