8. Adımdaki Değişiklikler
Düzenleyen: Andrew Bookholt —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the paper backing covering the self-adhesive pads on the two heat sinks included in the kit. | |
| [* black] Lightly clean the surface of the two chips highlighted in red on the second picture. | |
| [* black] Stick the two heat sinks down against the top of the two chips highlighted in red on the second picture, being sure the fins are aligned as seen in the third picture. | |
| + | [* icon_reminder] When reinstalling the optical drive, be sure both the power and SATA cables do not interfere with the heat sink attached closest to their sockets on the motherboard. |