Xbox 360 Red Ring of Death Fix Kit 10 No'lu Adım Geçmişi

10. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt — 17 Mar 2011

	[* black] Stick the thermal pads down against the RAM chips on the bottom of the board.
	[* black] Reinstall the motherboard back into the chassis and reassemble your Xbox 360.
+	[* icon_note] The X-clamps are *not* reused when installing the red ring of death fix kit.
+	[* icon_reminder] If the kit did not solve your red ring of death, it may be necessary to tighten the flathead screws on the CPU and GPU heatsinks further. Additionally, it may be necessary to use a [product\|IF145-031\|heat gun] to reflow the solder on the GPU and CPU using a method similar to that used to fix the PlayStation 3 [guide\|3654\|yellow light of death\|stepid=17458].