Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

15. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] After removing a loop of copper tape around the digitizer connector, the display assembly can finally be separated from the logic board.
[* black] A copper shield fastened to the back of the battery can also be removed at this point.
[* blackicon_note] Presumably, the rear case is thin enough to warrant a copper shield for either heat dispersion or EMI protection, or both.
[* blackicon_note] Presumably, the rear case is thin enough to warrant a copper shield for either heat dispersion or EMI protection, or both.