4. Adımdaki Değişiklikler
Düzenleyen: Brett Hartt —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Set the motherboard on a support so that the CPU and GPU are completely supported and level. |
| [* icon_note] The support should be something that can resist temperatures upwards of 300 degrees Celsius. Suggestions: scrap lumber, old books, cardboard box. |
| [* icon_note] In the next few steps, you will be reflowing the solder under the chips marked in red. |
| [* icon_caution] Once you begin reflowing the chips, do not touch or move the motherboard until it is completely cool. Doing so can render the motherboard irreparably damaged. |