iPod Shuffle 2nd Generation Battery Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt — 15 Eki 2010

	[* black] Use the edge of an iPod opening tool to peel the adhesive under the battery that secures it to the logic board.
	[* black] Flip the battery upwards to reveal the solder pads soldered to the logic board.
+	[* icon_note] Before desoldering the battery, be sure to scrape the protective resin off both solder points.
+	[* black] Desolder the battery from the logic board by heating up the solder joint with a soldering iron and simultaneously using a pair of tweezers to pull the battery wire away from the logic board.
+	[* icon_caution] Do not touch the + and - leads together.
+	[* black] If you have never soldered before, we have a [guide\|750\|guide] that makes it easy.