Samsung NX300 CMOS Sensor Assembly Replacement 2 No'lu Adım Geçmişi

2. Adımdaki Değişiklikler

Düzenleyen: Andres Perez — 17 Şub 2015

Düzenleme onaylandı tarafından Andres Perez

+	[title] Sensor Assembly
+	[* red] Using a 1.5mm HEX screwdriver, remove the three black screw located on the extensions of the metal assembly.
+	[* orange] With the assistance of tweezers, pull out the last data ribbon connecting the sensor to the sound board. This ribbon must be pulled away from the sound board.