Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert the flat end of a spudger between the upper and lower case where they meet at the rear of the side vent opening.
[* icon_note] There is a strong plastic clip connecting the two case halves (the first of many), so you'll need to use quite a bit of force.
[* icon_note]
Leave the spudger in place when you've created a gap, to preventuntil you open the clip from re-attachingcase completely. The clips are very springy and may cause the case to snap shut while you're working.
[* icon_note] There is a strong plastic clip connecting the two case halves (the first of many), so you'll need to use quite a bit of force.
[* icon_note]
Leave the spudger in place when you've created a gap, to preventuntil you open the clip from re-attachingcase completely. The clips are very springy and may cause the case to snap shut while you're working.