Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Eric Chen

Düzenleme onaylandı tarafından Eric Chen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove Bezel (plastic frame)
[* black] Unclip two latches, one in each bottom corner. They are located below the screws previously removed.
-[* black] Place fingers to the inside of the bezel. Separate the bezel by pulling it away from the back cover. Pull until 1 side has been lifted.
+[* black] Place fingers to the inside of the bezel. Separate the bezel by pulling it away from the back cover. Pull until one side has been lifted.
[* black] Use the same technique to separate all remaining sides of the bezel.
[* black] Starting at one corner and making your way around, make sure the bezel is completely unattached from the back cover.
[* black] Completely remove bezel from LCD screen and back cover.