Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Sarah Westberg —

Düzenleme onaylandı tarafından Sarah Westberg

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Eyepiece
[* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps.
-[* red] On the bottom side of the camera, unscrew both 4.5 mm screws holding the bottom into place, per image 1.
-[* orange] On the right side of the camera, unscrew both 4.5 mm screws holding the side into place, per image 2.
-[* yellow] On the right side of the camera, unscrew the 4.5 mm screw underneath the A/V flap, per image 2.
-[* green] On the top side of the camera, unscrew the 4.0 mm screw on the left-side wrist strap loop, per image 3.
+[* red] On the bottom side of the camera, remove two 4.5 mm screws holding the bottom case in place.
+[* orange] On the right side of the camera, remove two 4.5 mm screws.
+[* yellow] On the right side of the camera, remove the single 4.5 mm screw underneath the A/V flap.
+[* green] On the top of the camera, remove the 4.0 mm screw on the left-side wrist strap loop.