Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Jase Sasaki

Düzenleme onaylandı tarafından Jase Sasaki

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Unscrew the four Phillips #1 screws holding down the back panel with a Phillips JIS #1 screwdriverpanel. Then remove the Mone 5.8mm Phillips #1 screw labeled "M" in the middle of the back panel with a Phillips #1 screwdriverpanel.
[* red] Four 3.9mm Phillips JIS #1 screws
[* black] Unscrew the four Phillips #1 screws holding down the back panel with a Phillips JIS #1 screwdriverpanel. Then remove the Mone 5.8mm Phillips #1 screw labeled "M" in the middle of the back panel with a Phillips #1 screwdriverpanel.
[* red] Four 3.9mm Phillips JIS #1 screws
[* orange] One 5.8mm Phillips #1 screw