Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Jase Sasaki

Düzenleme onaylandı tarafından Jase Sasaki

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Remove the sevenblack] Unscrew the six Phillips #1J1 screws that are holding the fan and heat sink down. Then use Philips #1 to remove the screw near the bottom of the heat sink.
[* red] Six Silver Chrome 5.8mm
[* orange] One 5.8mm
[* red] Remove the sevenblack] Unscrew the six Phillips #1J1 screws that are holding the fan and heat sink down. Then use Philips #1 to remove the screw near the bottom of the heat sink.
[* red] Six Silver Chrome 5.8mm
[* orange] One 5.8mm
[* icon_caution] Remove the four screws that are holding down the CPU (the four to the top left that form a rectangle in this image) first. Unscrew them in an X pattern (eg. top left screw, bottom right screw, top left screw, bottom right screw) to minimize risk of harming CPU.

Resim 1

Eski Sürüm

Yeni Sürüm