Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Jase Sasaki

Düzenleme onaylandı tarafından Jase Sasaki

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] RemoveUnscrew the sevensix Phillips #1J1 screws that are holding the fan and heat sink down. Then use Philips #1 to remove the screw near the bottom of the heat sink.
[* black] RemoveUnscrew the sevensix Phillips #1J1 screws that are holding the fan and heat sink down. Then use Philips #1 to remove the screw near the bottom of the heat sink.
[* red] Six Silver Chrome 5.8mm
[* orange] One 5.8mm
[* icon_caution] Remove the four screws that are holding down the CPU (the four to the top left that form a rectangle in this image) first. Unscrew them in an X pattern (eg. top left screw, bottom right screw, top left screw, bottom right screw) to minimize risk of harming CPU.