Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Ben Canfield

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Slowly slide the back cover away from the device
[* icon_caution] DANGER!: The back casing is held in place by two ribbon cables so don't pull the back cover too far from the camera
[* icon_caution] DANGER!: The back casing is held in place by two ribbon cables so don't pull the back cover too far from the camera
[* black] Carefully remove the two cables by pulling gently parallel to the board to fully remove the back case.