1. Adımdaki Değişiklikler
Düzenleyen: Christopher Wakamatsu —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_reminder] Check that all the rest of the orange cables are removed from the logic board. | |
| - | [* red] Remove the two screws on the top part of the camera on the back side. |
| - | [* icon_caution] |
| + | [* red] Remove the two screws on the top part of the camera on the back side. (This will release the top layer of the camera) |
| + | [* icon_caution] Pull the top off slowly because it is still attached. |