Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Eddie Lo

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_reminder] Check that all the rest of the orange cables are removed from the logic board.
-[* red] Remove the two screws on the top part of the camera on the back side. (This will release the top layer of the camera)
+[* black] Verify that the orange cables are removed from the logic board.
+[* red] Remove the two screws on the upper part of the back side.
[* icon_caution] Pull the top off slowly because it is still attached.