Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert the flat end of a spudger in between the lower case and framework, near the top right corner of the DSi.
[* black] Carefully run the spudger along the right edge of the DSi, creating an opening in the process.
-[* black] Continue running the spudger along the backside of the DSi until the majority of the lower case has been lifted off.
+[* black] Continue running the spudger along the backside of the DSi until the majority of the lower case has been separated from the lower front panel.