Nintendo DSi Power Board Replacement 4 No'lu Adım Geçmişi

4. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt — 12 Kas 2010

	[* black] Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on LED indicator ZIF connector.
-	[* icon_caution] Be sure you are prying up on the hinged retaining flap, not the socket itself.
+	[* icon_caution] Be sure you are prying up on the hinged retaining flap, *not* the socket itself.
	[* black] After flipping up the locking tab on the socket, use your fingers or a pair of tweezers to gently pull the cable straight out of its socket.
+	[* icon_note] If necessary, transfer the power board ribbon cable to your new power board.