| - | [* black] Using a Plastic Opening Tool, release the clips by pulling up inside the divots in the plastic walls and separate the two pieces. |
|---|
| - | [* icon_note] The release clips are located in the little divots around the base of the walls around the battery casing. |
|---|
| + | [* black] Using a Plastic Opening Tool, release the clips by pulling up inside the crevasse in the plastic walls and separate the two pieces. |
|---|
| + | [* icon_note] For this step you will want to use two tools. One to pull up and the other to hold the gap open. |
|---|