Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Casey Matalone —

Düzenleme onaylandı tarafından Casey Matalone

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Once the hood is off we begin by using the rough sand paper to smooth out the hole on both the fron and back side.
- [* black] It is best to start with rough sand paper and move to fine to make the surface very smooth.
+[* black] Begin by sanding both sides of the hole surface with the rough sand paper until the larger pieces of old fiberglass are smooth.
+[* black] Use the fine sand paper in succession with the rough to make the surface as smooth as possible.