Repairing a Hole in a Fiber Glass Jet Ski Body 11 No'lu Adım Geçmişi

11. Adımdaki Değişiklikler

Düzenleyen: Casey Matalone — 14 Mar 2015

Düzenleme onaylandı tarafından Casey Matalone

	[* black] Once dry, confirm that the resin has fully hardened.
	[* black] Use the sand paper to sand the resin surface and existing surface to create a seamless finish.
	[* icon_note] Once again, start with the rough sand paper and then finish sanding with the fine.
-	[* black] After sanding the fiber glass should be flush with the existing surface of the body. At this point feel free to paint over the hole and get back on the lake.
+	[* black] After sanding, the fiber glass should be flush with the existing surface of the body. At this point feel free to paint over the hole and get back on the lake.