Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: John Lasseter

Düzenleme onaylandı tarafından John Lasseter

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Line up the pedal with its socket. Begin to turn it in the correct tightening direction that was specified at the beginning of the guide.
+[* red] Line up the pedal with its socket. Begin to turn it in the correct tightening direction that was specified at the beginning of the guide.
[* icon_note] Placement of the wrenches for tightening can be found in the picture and are consistent with the directions from step 2.
-[* black] Once the pedal is partially secured from the initial rotations, use your wrench to continue tightening.
- [* icon_note] For tightening, the right pedal must be turned clockwise and the left pedal must be turned counter-clockwise. Opposite of Step 2
-[* black] Once resistance is felt, you will want to turn the pedal about 1/8 of a rotation more for proper tightness.
+[* orange] Once the pedal is partially secured from the initial rotations, use your wrench to continue tightening.
+[* icon_note] For tightening, the right pedal must be turned clockwise and the left pedal must be turned counter-clockwise. Opposite of Step 2
+[* icon_note] Once resistance is felt, you will want to turn the pedal about 1/8 of a rotation more for proper tightness.
[* icon_caution] Do not crank on the wrench to tighten the pedal further. This can lead to a stuck pedal in the future.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi