Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: John Lasseter

Düzenleme onaylandı tarafından John Lasseter

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Line up the pedal with its socket. Begin to turn it in the correct tightening direction that was specified at the beginning of the guide.
- [* icon_note] Placement of the wrenches for tightening can be found in the picture and are consistent with the directions from step 2.
-[* orange] Once the pedal is partially secured from the initial rotations, use your wrench to continue tightening.
-[* icon_reminder] For tightening, the right pedal must be turned clockwise and the left pedal must be turned counter-clockwise. Opposite of Step 2
-[* icon_note] Once resistance is felt, you will want to turn the pedal about 1/8 of a rotation more for proper tightness.
- [* icon_caution] Do not crank on the wrench to tighten the pedal further. This can lead to a stuck pedal in the future.
+[* red] Place the pedal in the socket and begin tightening it until it is secure.
+ [* icon_note] To tighten the pedals, turn the right pedal clockwise and the left pedal counter-clockwise.
+[* black] Once resistance is felt, you will want to turn the pedal about 1/8 of a rotation more for proper tightness.
+ [* icon_caution] Do not use excessive force when you are tightening the pedal. This can lead to difficulty removing the pedal in the future.

Resim 2

Eski Sürüm

Yeni Sürüm