Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Thomas Paulsen

Düzenleme onaylandı tarafından Thomas Paulsen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Carefully inspect the pedal to make sure that is has not been damaged or deformed in any manner that will detract from its ability to carry out its specified duty.
- [* icon_reminder] During this inspection make sure to check within the "screw/bolt tunnels" with a flashlight for any gunk or damage as well.
+[* black] Line up the pedal with its socket and begin to turn it in the correct tightening direction that was specified at the beginning of the guide.
+[* black] Once the pedal is partially secured from the initial rotations, use your wrench to continue tightening.
+[* black] Once resistance is felt, you will want to turn the pedal about 1/8 of a rotation more for proper tightness.
+ [* icon_caution] Do not crank on the wrench to tighten the pedal further. This can lead to a stuck pedal in the future.