Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Thomas Paulsen

Düzenleme onaylandı tarafından Thomas Paulsen


Adım Satırları

[* black] Line up the pedal with its socket and begin to turn it in the correct tightening direction that was specified at the beginning of the guide.
[* icon_note] Placement of the wrenches for tightening can be found in the picture.
[* red] This is the regular wrench holding on to the pedal's securing hex-nut.
- [* orange] This is the Alan wrench in the bolt socket.
+ [* orange] This is the Allen wrench in the bolt socket.
[* black] Once the pedal is partially secured from the initial rotations, use your wrench to continue tightening.
[* black] Once resistance is felt, you will want to turn the pedal about 1/8 of a rotation more for proper tightness.
[* icon_caution] Do not crank on the wrench to tighten the pedal further. This can lead to a stuck pedal in the future.