Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: John Lasseter

Düzenleme onaylandı tarafından John Lasseter

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Line up the pedal with its socket. Begin to turn it in the correct tightening direction that was specified at the beginning of the guide.
[* icon_note] Placement of the wrenches for tightening can be found in the picture and are consistent with the directions from step 2.
[* orange] Once the pedal is partially secured from the initial rotations, use your wrench to continue tightening.
-[* icon_note] For tightening, the right pedal must be turned clockwise and the left pedal must be turned counter-clockwise. Opposite of Step 2
+[* icon_reminder] For tightening, the right pedal must be turned clockwise and the left pedal must be turned counter-clockwise. Opposite of Step 2
[* icon_note] Once resistance is felt, you will want to turn the pedal about 1/8 of a rotation more for proper tightness.
[* icon_caution] Do not crank on the wrench to tighten the pedal further. This can lead to a stuck pedal in the future.