10. Adımdaki Değişiklikler
Düzenleyen: Miguel Gomez —
Düzenleme onaylandı tarafından Miguel Gomez
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Make sure skewer is completely inserted into the frame slots before tightening. | |
| - | [* orange] Rotate the skewer clockwise and ensure a snug contact between the skewer caps and the frame slots. |
| + | [* orange] Rotate the skewer cap clockwise and ensure a snug contact between the skewer caps and the frame slots. |
| [* yellow] Rotate the skewer lever towards the bicycle frame. | |
| - | [* icon_note] If the skewer lever is too difficult to |
| + | [* icon_note] If the skewer lever is too difficult to twist towards the frame, back off the skewer cap until you can twist the lever towards the bicycle frame and it feels snug. |