Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: aaron thielk

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Adjust high and low end adjustment stops. If these are not adjusted right, the chain might fall off either end of the casset when shifting into the first and last gear. The goal is to make the range of motion of the derraillur guided sprocket to only go the range of the casset and no more.
-[* black] The adjustment screws are labeled H and L. Tightening each will decrease either low or high end travel and loosening the screw will increase the travel.
+[* black] Adjust the low end adjustment stop.
+[* black] The adjustment screw that corresponds to the smallest gear(high gear)is labeled H.
+[* black] Tightening the screw will push the derailleur inwards and loosening it will push the derailleur outwards.
+[* black] use the adjustment screw to align the guide sprocket on the derailleur with the smallest gear on the cassette.
+[* black] the second picture is of a misaligned derailleur.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm