Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Jonathan Fish

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Adjust the low end adjustment stop.
-[* black] The adjustment screw that corresponds to the smallest gear (high gear) is labeled H.
-[* black] Tightening the screw will push the derailleur inwards and loosening it will push the derailleur outwards.
-[* red] Use the adjustment screw to align the guide sprocket on the derailleur with the smallest gear on the cassette.
-[* black] The second picture is of a misaligned derailleur.
+[* black] Shift the rear derailleur into the highest (smallest) gear.
+[* red] Align the rear guide sprocket of the derailleur with the highest (smallest) gear, by tightening or loosening the screw labeled "H".
+[* yellow] The second picture is of a misaligned derailleur.
+[* icon_note] This alignment sets the maximum outward distance that the derailleur can move the chain. Without setting this boundary, the derailleur could shift the bike chain off of the gear and onto the axle. This boundary setting is referred to as the high end adjustment stop.

Resim 2

Eski Sürüm

Yeni Sürüm