Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: aaron thielk —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Adjust high andthe low end adjustment stops. If these are not adjusted right, the chain might fall off either end of the casset when shifting into the first and last gear. The goal is to make the range of motion of the derraillur guided sprocket to only go the range of the casset and no morestop.
[* black] The adjustment screws arescrew that corresponds to the smallest gear(high gear)is labeled H and L.H.
[* black] Tightening eachthe screw will decrease either low or high end travelpush the derailleur inwards and loosening it will push the derailleur outwards.
[* black] use the adjustment screw will increaseto align the travelguide sprocket on the derailleur with the small gear on the cassette.
[* black] the second picture is of a misaligned derailleur.
[* black] Adjust high andthe low end adjustment stops. If these are not adjusted right, the chain might fall off either end of the casset when shifting into the first and last gear. The goal is to make the range of motion of the derraillur guided sprocket to only go the range of the casset and no morestop.
[* black] The adjustment screws arescrew that corresponds to the smallest gear(high gear)is labeled H and L.H.
[* black] Tightening eachthe screw will decrease either low or high end travelpush the derailleur inwards and loosening it will push the derailleur outwards.
[* black] use the adjustment screw will increaseto align the travelguide sprocket on the derailleur with the small gear on the cassette.
[* black] the second picture is of a misaligned derailleur.