Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Jonathan Fish —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Now it's time to attach the cable to the derailleur
[* red] Make sure the shifter is in its highest number gear, which corresponds to the default position of the derailleur. This will make sure the cable is let out as far as possible
[* blackgreen] Slide the cable through the barrel adjuster screw until the cable housing bottoms out.
[* blackgreen] Slide the cable through the barrel adjuster screw until the cable housing bottoms out.
[* blue] Pull the slack out of the cable while clamping it down with the nut that is attached to the derailleur.
[* black] Your derailleur is now in rough adjustment.

Resim 2

Eski Sürüm

Yeni Sürüm