Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Jonathan Fish

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Now it's time to attach the cable to the derailleur
[*
red] Make sureShift the bike into the shifter is in its highest number gear, which corresponds to the default position of the derailleur. This will make sure the cable is let out as far as possiblenumbered gear.
[* black] Now it's time to attach the cable to the derailleur
[*
red] Make sureShift the bike into the shifter is in its highest number gear, which corresponds to the default position of the derailleur. This will make sure the cable is let out as far as possiblenumbered gear.
[* green] Slide the cable through the barrel adjuster screw until the cable housing bottoms out.
[* blue] Pull the slack out of the cable while clamping it down with the nut that is attached to the derailleur.
[* black] Your derailleuricon_note] By putting the shifter in the highest gear, the cable is now in rough adjustmentlet out as far as possible. Clamping the cable at this point ensures that all slack is removed from the line.
[* black] Your derailleuricon_note] By putting the shifter in the highest gear, the cable is now in rough adjustmentlet out as far as possible. Clamping the cable at this point ensures that all slack is removed from the line.