Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

6. Adımdaki Değişiklikler

Düzenleyen: Travis Tonder

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] nowNow you we need to fine tune the derailleur. useUse the barrel adjuster located where the cable and cable housing meet the derailleur.
[* black] looseningLoosening the barrel adjuster screw will effectively pull in the cable causing the derailleur to slightly move over to a larger gear. startStart with quarter or half turns.
[* black] usingUsing the barrel adjustment screw, position the guide sprocket so it is right under the smallest gear. thenThen shift through all the rest of the gears while pedaling. the derailur should shift one gear everytime you shift up or down on the shifter.
[* black] repeatRepeat the previous step until the derailleur shifts smoothly and makes a minimal amount of noise.
[* black] nowNow you we need to fine tune the derailleur. useUse the barrel adjuster located where the cable and cable housing meet the derailleur.
[* black] looseningLoosening the barrel adjuster screw will effectively pull in the cable causing the derailleur to slightly move over to a larger gear. startStart with quarter or half turns.
[* black] usingUsing the barrel adjustment screw, position the guide sprocket so it is right under the smallest gear. thenThen shift through all the rest of the gears while pedaling. the derailur should shift one gear everytime you shift up or down on the shifter.
[* black] repeatRepeat the previous step until the derailleur shifts smoothly and makes a minimal amount of noise.