Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

6. Adımdaki Değişiklikler

Düzenleyen: Travis Tonder

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] fineFine tune the derailleur Usingusing the barrel adjuster screw located where the cable and cable housing meet the derailleur.
[* black] shiftShift through each gear while pedaling. theThe derailleur should move one gear every time you shift up or down on the shifter.
[* icon_note] ifIf the chain skips or makes noise when not shifting, Useuse the barrel adjustment screw to position the guide sprocket so it is right under the gear that corresponds to whatthe number the shifter displays.
[* black] fineFine tune the derailleur Usingusing the barrel adjuster screw located where the cable and cable housing meet the derailleur.
[* black] shiftShift through each gear while pedaling. theThe derailleur should move one gear every time you shift up or down on the shifter.
[* icon_note] ifIf the chain skips or makes noise when not shifting, Useuse the barrel adjustment screw to position the guide sprocket so it is right under the gear that corresponds to whatthe number the shifter displays.
[* icon_note] Loosening the barrel adjuster screw pulls in the cable, causing the derailleur to move slightly towards a larger gear. Tightening causes the derailler to move towards a smaller gear.
[* black] Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise.