Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

6. Adımdaki Değişiklikler

Düzenleyen: Jonathan Fish —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Fine tune the derailleur by tightening or loosening the barrel adjuster screw. Loosening it it causes the derailleur to move slightly towards a larger gearsprocket, while tightening it moves the derailler towards a smaller gearsprocket.
[* red] Fine tune the derailleur by tightening or loosening the barrel adjuster screw. Loosening it it causes the derailleur to move slightly towards a larger gearsprocket, while tightening it moves the derailler towards a smaller gearsprocket.
[* black] Shift through each gear while pedaling. The derailleur should move one gear every time you shift up or down on the shifter.
[* black] If the chain skips or makes noise when not shifting, use the barrel adjustment screw to position the guide sprocket so it is right under the gearsprocket that corresponds to the number the shifter displays.
[* black] If the chain skips or makes noise when not shifting, use the barrel adjustment screw to position the guide sprocket so it is right under the gearsprocket that corresponds to the number the shifter displays.
[* black] Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise.