Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: peteralstone

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_note] Removing the following screw isn't strictly necessary, but it will make the next step easier.
-[* black] Remove the black T6 Torx screw from near the battery connector on the logic board.
+[* icon_note] Removing the following screw isn't strictly necessary, but it will make the next step easier and will make it much easier to install the new battery later.
+[* black] Remove the black T6 Torx screw from near the battery connector on the logic board. If you are very careful not to strip the screw, a small flat or phillips head screwdriver will work, but a torx bit is much easier to work with and less likely to strip the screw.