Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: David Hodson

Onay bekleniyor


Adım Satırları

-[* black] After this, reattach and adjust the brake cable accordingly.
+[* black] Replace and tighten the 22 mm lug nut with a ratcheting socket wrench.
+[* black] Use a hammer and pair of vise grips to slide the wheel retaining pin back into place.
+[* black] Follow the directions in step 2 in reverse order to reattach the brake cable.
+[* black] Adjust the brake cable adjustment nut as necessary. The rear brake lever should be about 0.8" to 1.0" away from the handlebar when fully engaged.