1. Adımdaki Değişiklikler
Düzenleyen: Lesley —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Check for debris and dust around the power button. If none, start by unscrewing the seven outside shell screws and pry open with the ifixit claw to take off the camera's back case. | |
| - | [* black] Remove LCD screen and unscrew the three screws on the back panel. |
| [* black] Unclip the four connecters that hold down the orange copper film strips. Then carefully pull out the three film strips with the ifixit tweezers. | |
| [* black] Remove the one screw at the top left corner. | |
| [* black] Then pull back the black claw to the right that holds the main plate down. | |
| [* black] Flip the LCD and green chip to the left to get to the power button. | |
| [* black] Replace power button with new one. |