Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Landon Epps

Düzenleme onaylandı tarafından Landon Epps

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Position the laptop where the bottom enclosure is facing upward.
-[* red] Locate the 10 screws holding the bottom enclosure in place.
-[* black] Use a Phillips #0 Screwdriver to detach the enclosure from the laptop.
+[* black] Position the laptop so that the bottom enclosure is facing upward.
+[* red] Locate the 10 1.9mm screws holding the bottom enclosure in place.
+[* black] Use a Phillips #0 Screwdriver to remove all 10 screws.