Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Jacob Abrego

Düzenleme onaylandı tarafından Jacob Abrego

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Place the camera on the side opposite of the wrist strap handle.
[* black] Then begin to pry the casing apart with both hands by applying pressure to the top and bottom of the camera.
[* [* red] Remove the small metal plate underneath the plastic covering and set aside. (It should be loosely attached)
[* [* red] Remove the small metal plate underneath the plastic covering and set aside. (It should be loosely attached)
[* icon_note] Note: A rubber foam washer that separates the lens from the casing will fall off when the case is removed. Be sure to store it safely.
[* icon_note] Note: When reassembling ensure the back plate screw tabs are over the wrist strap attachment and the front plate screw tabs go under orange casing.