Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: Jacob Reiter

Düzenleme onaylandı tarafından Jacob Reiter

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Gently screw the sprocket into the hub.
[* black] Screw the bearing race on. Make sure not to tighten too much. The sprocket and wheel should still spin easily.
-[* icon_note] Remember to place the bearings in the right spot. The large one is placed as shown by the blue line, and the small one as shown by the red line.
+[* icon_note] Remember to place the bearings in the right spot. The large one is placed as shown by the red line, and the small one as shown by the orange line.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm