Eşyalarını Tamir Et Topluluk Mağaza

13. Adımdaki Değişiklikler

Düzenleyen: Jonathan Fish —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Hand tighten the axel, such that there is no slop or give, until it touches the bearing, without putting any pressure on them.
+[* black] Hand tighten the cone, such that there is no slop or give, until it touches the bearings, but without putting any pressure on them.
[* icon_note] This is a bit of a tedious process, which can take some time. Patience is a must for this step.