Bu Adımdaki Değişiklikler
Düzenleyen: Jackson Shinpaugh —
Düzenleme onaylandı tarafından Jackson Shinpaugh
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Plug the replacement screen into the main circuit board through the metal casing. |
|---|---|
| - | [* black] Then put the metal casing back on and repeat steps 1-4 in reverse, in order to put the camera back together. |
| + | [* red] The new screen is now ready to be attached. Plug the replacement screen into the main circuit board in the spot outlined in the first photo. |
| + | [* black] Then re-attach the metal casing by aligning it with the screw holes and replacing the screws removed in step 5. |
| + | [* black] The screen can now be placed in its original position. |
| + | [* black] Repeat steps 1-4 in reverse order to reassemble the camera. |